One person can easily install an excessively long curtain rod at a glance!

Do it yourself without asking anyone and save installation costs. The purchase of a 3.3-meter curtain rod for 45RMB in the previous period depends on the installation steps. That's it. First, let's talk about how to find the installation location. My restaurant has a width of 3.38 meters and I purchased two 1.5+1.8-meter round Curtain Tubes to combine into a whole 3.3-meter-long curtain rod. Therefore, the reserved space at both ends is 4cm each. First, use a ruler to look back 4cm from the side wall, and then look back 2cm to hang the rod. Otherwise, the base will be pressed against the opening of the rod. Make a mark and draw the marking line as long as possible. Find 4cm from the facade wall and add the edge of the fully connected base, totaling about 5cm. The distance of 5cm here is the distance required for hanging curtains. Similarly, draw a longer marking line with two L-shaped lines. Take out a full base and use the circular edge of the base to find the two L-shaped edges to determine the position of the base. Mark by drawing circles through the screw holes. The other end also operates the support in the middle position. First, find the midpoint. The opening is 3.38 meters wide and the curtain rod is 3.3 meters long. Therefore, the endpoint of the opening top is 3.3 ÷ 2=1.65+0.04=1.69 meters. Measure the 1.69-meter position with a tape measure and mark it with a long line. The diameter of the full top support base is 4cm. The rigorous measurement method is to mark two centimeters on each side from the 1.69-meter line, and then look back 5cm from the vertical wall to determine the position of the stainless steel top mounting bracket base. Once you locate and mark the hole, you can proceed with drilling

Install the expansion rod and pay attention to the direction of the fully threaded rod when installing the expansion screw, do not tilt it, and avoid rework. After the support is installed, start installing the curtain rod. First, insert one section from the middle position and then thread the other end outward. After installation, fix the connecting pipe. Note that the circular tube should only be inserted into the middle of the connecting tube. Use your thumb to feel it and fix the connecting tube screw. First, insert the second screw into the wall end, and then push it towards the wall. This way, there will be room to insert the connecting tube into the middle end. The curtain can be installed by adjusting the left and right positions of the fixing screws as a whole. There is also a small tip for hanging curtains. Generally, the first ring at the top is fixed. Find a rubber band to tie vegetables and put it on the Curtain Ring. Then wrap it around the curtain rod twice to avoid pulling off the first bowl due to the inertia of pulling the curtain. The important thing is that it saves two more blockages. It's not too difficult, but you need to be careful. Friends who need tutorials, go practice now.

Let you choose home window curtain rod accessories and hardware accessories with peace of mind!

You can browse our Facebook page to learn more about ZENGHUI curtain rod

https://www.facebook.com/rod.zhcurtain

Thank you everyone, see you next time!